H.Stars (Guangzhou) Refrigerating Equipment Group Ltd.

  Nowadays, it’s become more and more aware of pharmaceutical enterprises to realize the significance of building an efficient and green to environment cooling system in the factory, because it can not only help the owner to save the running cost but also contribute to the society by reducing the emissions, especially for those developed countries . But how to design a simple but energy saving cooling system with clean workshop? Below we are going to give you a real case for your reference to help you understand well, especially for those are quite new to the water chiller system field. Firstly,this project has been done by  H.Stars Group  ,including the system design,equipment manufacturing and installation etc. Below is the detailed project overview to help you understand the owner’s requirement . Project address: one of the pharmaceutical factories located in China Project desire: Requesting a constant temperature with humidity for oral solid preparation workshop Project Requirement

  The development of Chinese ink industry can be traced back to the beginning of the 20th century. Since the reform and opening up, the domestic ink market has developed rapidly, and inks have been widely used in various media such as paper, metal, glass, and plastic. In recent years, affected by the further advancement of environmental protection work, the price of some chemical raw materials has risen, and the growth rate of Chinese ink industry has gradually slowed down. In the past three years, the growth rate has been about 3.5%. The profit margin has also shown a downward trend. Oversupply has appeared in some regions. Ink sales have become fiercely competitive. In order to meet the needs of market competition, energy saving and consumption reduction and product quality improvement will be a major rule for ink manufacturers to enhance their corporate competitiveness. However, the research process is a key process in the ink production process, which has a key impact on both yield

  Low-temperature brine chiller   is also one of the more commonly used refrigeration equipment. Its refrigerant is the so-called brine solution, which has a low freezing point. It is especially suitable for medium and low temperature chillers to carry cold capacity. The temperature is generally required to be controlled below 0 ℃, which is usually used for the low temperature demand of some special production lines in industry. So, what kind of harm will be caused to the Brine chiller if the ratio of Brine refrigerant is not correct? The refrigerant is used to transfer the cold and heat generated by the refrigerator to the intermediate substance of the object to be cooled or heated. The common refrigerants are air, water, brine, organic compounds and their aqueous solutions; When the outlet water temperature is 0 ℃, the commonly used water-borne refrigerant will freeze. At this time, it is necessary to select appropriate refrigerant, such as brine, glycol, etc. the selection principle

  Nowadays, as the increasing economy of peoples life, more and more people are in need of ice rink . Therefore, many engineer company is worried about designing a best ice rink refrigeration system with reliability and energy efficient goal. Here are some best suggestions for you before you build an ice rink. Better take a look and it will help you save your time and money. 1.   Refrigeration system features The refrigeration system of indoor ice skating rink usually adopts two refrigeration methods: 1)   Direct expansion and indirect cooling. Direct expansion adopts condensing unit; 2)   Indirect cooling adopts\ screw type low-temperature chiller , Glycol is used as a refrigerant to form ice on the rink. At present, uses indirect cooling methods is more popular in the ice rink market. The cooling host should select more than two, one of which can meet the cooling under normal load conditions. When the conditions are relatively bad or the operating host needs to be repaired, the other

  How to measure brine concentration for the brine chiller ? Saltwater brine chillers  are also one of the more commonly used refrigeration equipment. Its refrigerant is the so-called brine solution, which has a low freezing point. It is especially suitable for medium and low temperature chillers to carry cold capacity. The temperature is generally required to be controlled at 0 Below ℃, it is usually used for the low-temperature requirements of some special production lines in the industry. So, what kind of harm will the improper proportion of brine-carrying refrigerant cause to the chiller and how to measure brine concentration for the brine chiller ? The refrigerant is an intermediate substance used to transfer the cold heat generated by the refrigerator to the object to be cooled or heated. Commonly used refrigerants include air, water, saltwater, organic compounds, and their aqueous solutions; when the outlet water temperature is 0°C, the commonly used water-borne refrigerants wil

  H.Stars Group   has recently signed a contract with 90℃ dual source heat pump unit project for one of the famous automobile factory to replace the traditional boiler. Below are the features of high-efficiency 90-degree dual source heat pump: 1. Special design and customized size for easy installation. 2. Adopt the special compressor of Hanbell high temperature heat pump, with high compression ratio, high energy efficiency, stable performance, multi-level energy adjustment, accurately matching the load change of the unit, low noise and low vibration. It has a wide operating range and can adapt to different operating conditions. 3. Environmental protection adopts environmentally friendly refrigerant: R134A. 4. It is matched with the high-efficiency heat exchanger produced by our factory and adopts the latest high-efficiency heat exchange copper tube to optimize the heat transfer efficiency, compact structure, strengthen heat transfer on the water side and the refrigerant side, reduce u

  Nowadays, chemical plants always consider how to reduce the initial investment and operation cost when they need to install a  low-temperature chiller system for the factory. Because low temperature refrigeration unit is a very important equipment in chemical plant, which plays an important role in safety production. The initial investment of   low-temperature refrigeration unit   is large, and it is also one of the equipment with large energy consumption in chemical plant. How to reduce the investment and operation cost of   Glycol low temperature chiller   and system is very important for enterprises. This is one of H.Stars Group projects for one of the chemical base . The cryogenic unit and chilled water circulation system are designed and implemented .At first, the company's design engineers only chose the Ultra low temperature chiller and system design according to the cooling capacity required by customers. However, with the deepening of the project,  H.Stars Group  has fou