H.Stars (Guangzhou) Refrigerating Equipment Group Ltd.

 The  water-cooled chiller system  is an industrial cooling system composed of a water-cooled chiller, a water tank, a water pump, and a cooling tower. The water-cooled chiller is based on the cooling method of the condenser, which uses cooling water to take away the heat (cooling tower), rather than the fan to take away the heat, which is relative to the air-cooled chiller. Water-cooled chillers include Packaged water-cooled units, open-type water-cooled units, and screw-type chillers. The water-cooled chiller is composed of a compressor, an evaporator (the evaporator can be a water tank coil, a plate heat exchanger, or a shell and tube evaporator), a shell and tube condenser, an electric control part, and a water pump (can be external, not It is made on the chiller), and the water tank (generally, the box-type chiller will have a built-in water tank, and the open-type chiller or screw-type chiller will need an external water tank). Today we will talk about water-cooled ...

  The high-pressure failure of the chiller means that the compressor discharge pressure is too high, which causes the high-pressure protection relay to operate. The compressor discharge pressure reflects the condensing pressure, the normal value should be 1.4~1.8MPa, and the protection value setting is recommended not to exceed 2.0MPa. Because the long-term pressure is too high, it will cause the compressor to run too much current, easily burn the motor, and cause damage to the compressor. So what is the main cause of high pressure failure? How to solve it? 1. Excessive refrigerant charge. This situation generally occurs after maintenance, and it is manifested as high suction and discharge pressure and balance pressure, and the compressor operating current is also high. Solution: The refrigerant should be discharged according to the suction and discharge pressure and the balance pressure and the operating current under the rated conditions until it is normal. 2. The cooling water t...