H.Stars (Guangzhou) Refrigerating Equipment Group Ltd.

  It’s common acknowledged that chemical factory is quite easy cause explosion if all the electrical products don’t handle well. Today we are going to share one of the cooling project with explosion proof chiller system to help you understand How to design a best   explosion proof industrial chiller   for Chemical factories. Project Overview This project is an industrial cooling project of Chemical Co., Ltd. The content of the project includes: 1. Pure water system: The dosage is 15T/day, and it needs to be reduced from 25°C to 4°C within 8H; 2. Chilled water system: water flow rate is 100m3/h, inlet water temperature is 12°C, outlet water temperature is 4°C; 3. Cooling water system: the water flow rate is 370m3/h, and the temperature difference between inlet and outlet water is 5℃. The explosion-proof grade of all electrical equipment is required to reach ExdIIBT4. Equipment configuration instructions 1. The cold source of the pure water system uses a model 20STB-25AD4 air cooled low

  Sand mill, also known as laboratory bead mill, or nano sand mill, is mainly used for wet grinding of chemical liquid products. It is mainly composed of body, grinding cylinder, sand grinding disc (lever), grinding medium, motor and feeding pump. The speed of feeding is controlled by the feeding pump. The grinding media of this equipment are generally divided into zirconia beads, glass beads, zirconium silicate beads, etc.   Since the sand mill (bead mill) is working, the material and the grinding medium will have strong collision and friction, which will generate a lot of heat energy, and the grinding inside of the sand mill should generally not exceed 65 degrees. The machine protection temperature will cause the temperature switch to act, and the sand mill will automatically stop for protection, thus affecting the production efficiency. Inversely, if the internal temperature of the grinding is too low, the viscosity of the grinding slurry will be too high, the action motor cannot be

  The compressor is the heart of the   chiller , and the normal operation of the compressor is the basis for the normal operation of the chiller. Therefore, if we want to understand the chiller, we must first understand the compressor. Today we will talk about the reasons for the internal protection of the semi-hermetic screw compressor. There is a thermal switch inside the screw compressor. The function of this switch is to disconnect the power supply circuit to the motor of the compressor when the temperature of the compressor exceeds the set value, and the compressor can not be turned on until the compressor is cooled down. And compressor Work. This is the internal protection of the compressor. Today we will talk about the reasons and solutions for this situation. 1.The refrigeration system is short of refrigerant. When the refrigerant is insufficient, the refrigerant returning to the compressor will be overheated, causing the compressor to heat up as a whole, causing the thermal sw

  First of all we need to understand what is meaning by "carbon dioxide " here. Generally speaking, carbon  dioxide emissions refer to the emissions of greenhouse gases such as carbon dioxide and methane. Carbon reduction action is to reduce greenhouse gas emissions, thereby reducing the greenhouse effect. If too much greenhouse gas emissions cause the earth's average temperature to be too high, it will lead to global climate anomalies. The most direct result is the melting of glaciers in the Arctic and Antarctic, rising sea levels, submersion of land and coastal cities, and complete disappearance of most islands. Natural disasters that are sensitive to temperature changes, such as typhoons, extreme weather, and forest fires, will increase substantially. However, while we are carrying out reducing carbon emssion ,we still need confort cooling air in hot seasons. How we deisgn the system to make it greener ? Below is one of the project we have designed with  a high efficie

  We all know that according to different heat dissipation methods, chillers can be divided into air-cooled chillers and water-cooled chillers. What is the difference between air-cooled chillers and water-cooled chillers? ​ 1. The  air-cooled chiller  uses copper tubes and aluminum fins to dissipate heat from the condenser. A fan is required to blow the outdoor air through the heat exchange fins and take away the heat of the condenser, so the air-cooled chiller does not need to be connected to the cooling tower. But compared with water-cooled chillers, under the same power, air-cooled chillers have larger equipment size and higher noise. The condenser of water-cooled chillers exchanges heat with the cooling water from the cooling tower through the heat exchanger. The excess waste heat will be transported to the cooling tower through the cooling water loop and released into the atmosphere, or enter the water-water heat exchanger or soil heat exchange coil for storage. Therefore, water-c

  The high-pressure failure of the chiller means that the compressor discharge pressure is too high, which causes the high-pressure protection relay to operate. The compressor discharge pressure reflects the condensing pressure, the normal value should be 1.4~1.8MPa, and the protection value setting is recommended not to exceed 2.0MPa. Because the long-term pressure is too high, it will cause the compressor to run too much current, easily burn the motor, and cause damage to the compressor. So what is the main cause of high pressure failure? How to solve it? 1. Excessive refrigerant charge. This situation generally occurs after maintenance, and it is manifested as high suction and discharge pressure and balance pressure, and the compressor operating current is also high. Solution: The refrigerant should be discharged according to the suction and discharge pressure and the balance pressure and the operating current under the rated conditions until it is normal. 2. The cooling water tempe

  Spot welding machine is a kind of mechanical equipment. It adopts the principle of double-sided double-point overcurrent welding. When working, two electrodes pressurize the workpiece so that the two layers of metal form a certain contact resistance under the pressure of the two electrodes, and the welding current changes from one When the electrode flows through the other electrode, the two contact resistance points form an instant thermal fusion, and the welding current flows from the other electrode to the electrode along the two workpieces to form a loop instantly, and will not damage the internal structure of the welded workpiece. Because the resistance welding machine is in the working process, the resistance head is prone to high temperature, which affects the accuracy of the processed product, so a chiller is needed to cool it next to ensure the accuracy of the processed product. The spot welding machine is equipped with a chiller, which can improve the safety and stability o