跳至主要内容

Why does the chiller evaporator freeze | www.oumalchiller.com

 During the use of the chiller, sometimes freezing occurs, and the chilled water malfunctions and alarms. The evaporator is one of the four core components of the chiller, and its importance is self-evident. Once it fails, the chiller will also go on strike. Today we will talk about the more common evaporator failures, namely Icing, to analyze the cause and find a solution. Why does the chiller freeze? How to eliminate the icing failure of the evaporator?


1. Look at the type of chiller, whether it is a low-temperature Chiller machine or a room temperature chiller machine.


low temperature chiller


For low-temperature chillers, use antifreeze instead of water. Such as Glycol.

A normal temperature chiller uses water for circulation. The temperature of this chiller is generally set at 5 degrees. The factory has set it before leaving the factory. Of course, you can set it yourself. If the temperature is too low, it will freeze. If the temperature of the medium and high temperature chiller is lower than 5 degrees without adding antifreeze, it is easy to cause the evaporator to freeze and cause the chilled water failure alarm.


2. See if the chiller is installed with a temperature sensor

The temperature probe will work in coordination with the control board. When the temperature is too low, the temperature probe will tell the main board that the main board will sound an alarm and stop automatically, so there will be no icing.


3. Insufficient refrigerant

During the use of the chiller, refrigerant leakage or blockage will occur. After the refrigerant is reduced, the evaporation pressure will be too low, causing the evaporator to freeze. The location of the icing is sometimes in the evaporator. If the refrigerant leaks, The method of elimination is to deal with the leaking part first, add enough refrigerant, and the fault will be eliminated. If the expansion valve is blocked, replace the expansion valve with a new one.


OUMAL CHILLER Supply all kinds of chillers, such as low temperature chiller, industrial chiller, Brine chiller, screw chiller, glycol chiller……If you are looking for a cooling water system, contact us. Will provide you the best chiller solution with good price.


评论

此博客中的热门博文

Constant Temperature Swimming Pool Heat Pump Unit | Hstarschiller.com

  We all know that winter swimming has many advantages: 1. It can enhance cardiovascular function. 2. The stimulation of cold water can close the peripheral blood vessels, increase the blood supply of important organs such as heart, brain, liver and spleen, so that more oxygen can be delivered to brain cells in time, which is conducive to the elimination of nervous system fatigue. 3. The skin of those who insist on winter swimming is ruddy, shiny and elastic. And people also hope to enjoy the fun of swimming in winter, but not everyone can bear it.  Hstars group constant temperature swimming pool heat pump  can be a good solution. 1. Demand analysis of swimming pool with constant temperature Constant temperature swimming pool, also known as indoor constant temperature swimming pool; that is, the temperature of the water in the pool heating system is maintained at 26~28℃, which is suitable for the temperature of the human body. When the indoor swimming pool is designed, the water body o

The Role and Characteristics of Condenser in Refrigeration System

  The four major components of the refrigeration system are compressor, evaporator, condenser and throttling device. The role of the condenser in the refrigeration system is mainly to cool and liquefy the gaseous refrigerant in the high temperature and high pressure state discharged from the compressor, so as to meet the requirements of the circulating use of the refrigerant in the system. The selection of the temperature difference between the condensing temperature and the coolant inlet and outlet involves economic issues in the refrigeration system. Increasing the condensation temperature and reducing the temperature difference between the coolant inlet and outlet can increase the heat transfer temperature difference, reduce the required heat transfer area, and reduce the investment cost of heat exchange equipment. However, lowering the condensing temperature can reduce the power consumption of the refrigeration compressor. The greater the temperature difference between the coolant

How to manufacture the shell and tube heat exchanger I

Shell and tube heat exchanger is a kind of heat transfer device, which is composed of shell, tube plate, tube bundle, baffle and cover; How is the manufacture to produce the shell and tube heat exchanger ? In the manufacturing of heat exchanger, the manufacturing process of cylinder, head and other parts is the same as that of general container manufacturing progress, but the requirements are different. The inspection of materials, drilling of tube plate and baffle hole, welding of cylinder and processing of flange are the key points to the quality. Throughout its manufacturing process, most of manufacturer still use traditional processes, in which the proportion of welding is relatively high, so it is necessary to weld in strict accordance with the welding process, and to detect the weld. The heat exchanger produced by H.Stars Group subsidiary company UAR, has gone through 18 processes. It has been meticulously processed in the heat exchanger process, providing two products with gua