H.Stars (Guangzhou) Refrigerating Equipment Group Ltd.

Heat pump drying technology and traditional drying technology ,which has more advantages? At present, agriculture, food, chemical industry, ceramics, medicine, mineral processing, pulp and paper, wood processing and other industries, all the production process almost all use drying, drying material quality depends on whether a good control of constant temperature. Heat pump drying technology is a mild, close to natural drying method, more suitable for most agricultural products, medicinal materials and other heat-sensitive materials drying. The principle of heat pump dryer is the use of reverse carnot principle of gas compressor pressurized, become (temperature up to 100 ℃), high temperature and high pressure gas entering the indoor side of heat exchanger (condenser), refrigerant condensing liquid heat release of the high-temperature heating drying room air. The materials in the drying room will vaporize and evaporate the moisture in the materials in the form of hot air, and...

Today both Condenser and Cooler are very important heat exchanging components in commmercial or   industrial refrigeration equipments , which are widely applied in many fields. Lots of customers who look for UAR for model selection are curious about the difference between Condenser and Cooler. So let’s make a brief introduction. 1)Phase change doesn’t occur in Cooler while it happens in Condenser. Generally, the difference lies in the spot and tube diameter of inlet and outlet. Connection tube in/outlet diameter varies a lot more than Cooler’s, which can be observed and compare obviously. 2) The second difference between Condenser and Cooler is their configuration of baffle plate. To Condenser its baffle plate construction is usually mounted left and right while Cooler’s are mounted up and down. One reason is their different heat exchange rate. 3) Intercooler has liquid level meter and liquid level control port while Condenser doesn’t have any. For intercooler, its gas inlet and o...